Technical Specification.

HAND HELD SHRINKWRAP SYSTEM
IMPORTANT
This unit must be run on a minimum of 3 Bars (45psi) pressure or damage will occur to the mixer and electrode
 
  1. Handle
  2. Trigger
  3. Value
  4. Jet pipe assembly
  5. Spark generator (lead assembly)
  6. Barrel
  7. Mixer
  8. Burner
  9. Electrode
  10. Cowl
  11. Cowl fixing screws & washers (4)
  12. Burner fixing screws (2)
  13. Handle assembly nuts & bolts (6)
  14. Regulator
  15. Hose
 

Technical Specification.
  • Fuel Propane Vapour
  • Ignition Piezo Crystal
  • Gas pressure 3 bars (45psi)
  • Gas conspumpsion 5lb/hr (2kg/h)
  • Dead mans handle operation
  • Excess flow check valve
  • Weight 1kg approx
  • Heat variable 100,000 B.T.U. (29 kW)